Posts Tagged calibration

Belt Scales 101: Webinar Recap

In case you missed last week’s webinar on belt scales, we’ve put together some of the key points:

Conveyor Considerations: Use strings to align the scale with the idlers on each side of the weigh bridge.Idler.png

  • Each idler should be parallel to the idler next to it.
  • The center of each idler should be in line with the idler next to it.
  • Each idler should not be higher or lower than the idler next to it.
  • Minimum of 2, preferred 3, idlers on each side of the weigh bridge

 

Read the rest of this entry »

, , , , , , , , , , , , , , , , , , , ,

Leave a comment

%d bloggers like this: