Posts Tagged Static Test Weight Calibration
Belt Scales 101: Webinar Recap
Posted by danstips in Belt Scales, Siemens, Webinar on December 15, 2015
In case you missed last week’s webinar on belt scales, we’ve put together some of the key points:
Conveyor Considerations: Use strings to align the scale with the idlers on each side of the weigh bridge.
- Each idler should be parallel to the idler next to it.
- The center of each idler should be in line with the idler next to it.
- Each idler should not be higher or lower than the idler next to it.
- Minimum of 2, preferred 3, idlers on each side of the weigh bridge