Posts Tagged whip antenna
Industrial Wireless 101: Which wireless antenna do I need?
Posted by danstips in Communications, Configuration, Cost Issues, Installation, Process terminology, Wireless, Wireless, Wireless Transmitters, wireless transmitters on April 11, 2012
In our continuing quest to understand industrial wireless, here’s the next bite. We already talked about the three industrial wireless bands and what they’re used for. Now, we’ll look at wireless antenna.
The antenna’s primary purpose is to focus or direct the signal that it is sending or receiving. The antenna strength, called gain, (measured in decibels) concentrates the transmitter or radio signal in a given direction, and reduces it in unwanted directions. The higher the antenna’s decibel value, the more focused the signal.
I’ve found that the word gain sometimes confuses people: they think gain refers to an antenna ADDING power to a radio. That’s actually what an amplifier does. Antenna gain is about concentrating or dispersing radio frequency energy and directing it where it needs to go. By packing that available energy into various patterns, as the different antenna types do, a radio signal can be spread out to a broad field or concentrated into a small tight pattern to go a farther distance.
Just like the three industrial wireless RF bands, there are three main types of antennas. And while lots of people have tried to explain them, with technical charts and inkblot-style diagrams, this simple description really hit home to me:
- Omni-directional antennas radiate their signal in all directions, like a floor lamp radiates light equally around itself.
- Semi-directional antennas radiate in a specific direction across a large area, like a spotlight shining on stage.
- Highly-directional antennas focus their signal on a very specific target, like a laser pointer focusing on a specific portion of a photo.
So, let’s take it a step further.