Posts Tagged installation tips

Move New Multi/HydroRanger Level Controller Guts into an Existing Multi/HydroRanger Enclosure

Written by: Dan Weise

The venerable Siemens Milltronics line of level controllers, the MultiRanger and HydroRanger Series, recently received a major update. The new models have high resolution LCD displays and built-in configuration tools with English language menus. Configuration time is reduced significantly without the need to reference manuals for parameter codes. These updated models have ‘HMI’ in the model name: MultiRanger HMI or HydroRanger HMI.

Read the rest of this entry »

, , , , , , , ,

Leave a comment

How can I keep the water out of my transmitters in washdown conditions?

Earlier this week, I took a call from a customer having problems with his pressure transmitter.  He’d figured out that his last transmitter, installed in an area with nearly continuous wash-downs, had failed because of water intrusion.  The bigger problem was that it wasn’t coming from a loose cover, a conduit pipe, or a leaky conduit connection.  In his case, the water came into the transmitter through a vent hole and messed up the measurement cell electronics.

So he asked me to recommend a 3000 PSI transmitter that could survive the washdown conditions.

Read the rest of this entry »

, , , , , , , , , , , , , , , ,

Leave a comment

%d bloggers like this: