Posts Tagged Honeywell PAC
Written by: Dan Weise
Good news! Recent upgrades to Honeywell’s HC900 Process and Safety Controller includes a major update to analog/loop processing speeds. Even though analog/loop cycle time has been 500mS since the early 2000s, early versions of the HC900 controller were only capable of a processing speed of 2x/second.
The upgrade to the HC900 CPU’s microprocessor hardware and an associated firmware update broke that processing speed limit for their SIL-rated CPUs. Honeywell C50S and C70S model CPUs v6.1 will now process analog inputs and loops at a rate of 10x/second (100mS per update). If your process needs additional analog/loop throughput speed, you will benefit from these enhancements to the HC900 systems.
To run at 100mS, a qualified hardware configuration is required: