Posts Tagged flowmeter
How to Measure Thermal Energy
Posted by danstips in Control, Cost Issues, Flow, Flowmeters, Installation, Magnetic Flowmeters, Measurement, Temperature, Ultrasonic Flowmeters on October 21, 2015
As energy costs and environmental concerns continue to rise, we count on our facility managers to take control of building/factory energy consumption. To reduce their companies’ carbon footprints, facility managers have begun implementing energy management programs to control their systems, optimize efficiency, and manage expenses.
But how are they doing it?
Let’s say you are trying to cool your facility. There are two steps to determining how much energy is consumed in the process. Read the rest of this entry »
How to install magnetic flowmeters in less than optimum conditions
Posted by danstips in Configuration, Flowmeters, Installation, Magnetic Flowmeters, Siemens, Webinar on October 16, 2015
Not all processes have optimal piping configurations. Learn how to identify alternative solutions for processes inhibited by piping constraints.
Siemens is hosting a free webinar on Wednesday, October 21 at 2pm EST.
In this 1-hour webinar, Siemens specialists will show you how the flowmeter can be installed and how this versatile instrument can be used to meet your application needs. They will be discussing the installation guidelines for process piping that can enhance your flowmeters’ performance.
Making a Siemens clamp-on flowmeter setup record easy to read
Posted by danstips in Communications, Configuration, Flow, Flowmeters, Serial, Siemens, Software, Troubleshooting, Ultrasonic Flowmeters on October 1, 2014
Everyone agrees that it’s good practice to keep a record of configurations and setups for any field instrument. I’m constantly recommending it to our customers for their transmitters, controllers, recorders, and other complex configurable devices.
Siemens clamp-on ultrasonic flowmeters even have a system in place to make this process easy. By connecting the meter to a PC through the RS-232 serial port, you can use a terminal program and the SITE command to fetch a data file that holds all the instrument’s configuration data.
The terminal program can also be used — with a set of instructions specific to the flowmeter — for viewing real-time operational data, performing device setup, uploading logger data, or uploading configurations known as SITE setups.
Recently, I was called to visit a plant and look at a misbehaving flowmeter. From previous discussions with the operator, I knew he’d saved SITE setup files for every flowmeter installed in the plant.
I asked if the customer would e-mail me the setup file before my visit, so I could check out how the flowmeter was set up. My request was met with a chuckle and “Well, if you really think it’s worth it…”